b'MIG WELDING EQUIPMENTMillermatic 255 MIG/Pulsed MIG WelderMillermatic 142208/240VMIGPULSE MIG UPDATED FEATURESFLUX-COREDColor screen featuring Auto-Set EliteElite and pulsed MIGWelds up to 1/2 aluminum, stainless, or mild steel84 lbsProgram mode allows easy save Perfect for LightIndustrial Applicationsand recall ofMIG (GMAW) Flux Core (FCAW)favoriteWelds steel 24GA -3/16weld settings 100 AMPS at 60% duty cycleAMPrange 30- 140 120VAuto spool gun detect See Optional 120 volt input Cylinder Rack on Complete with: Complete with: Page 216Power source with 10 ft. (3 m) power cord Extra Contact tips 10ft M-MDX 100 MIG gun CATALOG15 ft. (4.5 m) 300-amp Bernard BTB MIG.035/.045 in. (0.9/1.2 mm) reversible10ft work cable with clampGun for .035/.045 in. (0.9/1.2 mm) wire drive rolls Flow gauge regulator and gas hose10 ft. (3 m) work cable and clamp andMaterial Thickness Gauge 6.5 ft. power cord; 51 lbs50mm Dinse-style connectorITEM#MILLER #Flow gauge regulator and gas hose forITEM#MILLER #argon or AR/CO2 mix MI907734907734MI907838 907 838Millermatic 211Multimatic 220AC/DC Complete with: 30Auto-Set w/MVP AC/DCTIG MIG 6.5 ft (2 m) power cord and MVP FLUX-CORED STICK adapter plugs for 120V and 240VWill TIG Aluminum 10 ft (3 m) M-100 MIG gun and cable assembly13 ft (4 m) cable electrode holder and 25 mm Dinse-style connector12.5 ft (3.8 m) Weldcraft A-150 (WP-17) TIG torch with 25mmDinse-style connectorRFCS-14 HD foot control with 20 ftInverter Technology (6 m) cordMIG (GMAW)flux core (FCAW) 10 ft (3 m) work cable with clamp and Welds steel 24GA - 3/8 Works with either 120/240 volt power 25 mm Dinse-style connector230V - 150A - 30% duty cycle Automatically determines polarity Two Argon and AR/CO2 mix regulator/flow gauge with hosesAMP range 30 - 210 230VAC MIG gun and TIG torch can staySpool of Hobart .030 in (0.8 mm) wireMVP multi-voltage plug 115V or 230V connected at the same time Two contact tips for .030 in (0.8 mm) Complete with: 56 lbs wire10ft M-100 MIG gun Color LCD with Auto-Set EliteQuick Select drive roll for .024 in (0.6 10ft work cable w/clamp which can be used on multiplmm) or .030/.035 in (0.8/0.9 mm) solidmaterials and all processeswire, and .030/.035 (0.8/0.9 mm) flux Flow gauge regulator and gas hose with the ability to fine-tunecored wire6ft power cord 38 lbs settings AK2C TIG torch accessory kitITEM# MILLER # ITEM#MILLER #Material thickness gauge #229895MI211 907 614 MI907757907757Hook-and-loop cord wrapswww.sss-steel.com 211'