b'TUPABGE EG HATEEA DARERCHES & ARCHED GATE KITSTube Gate Arches 1-1/2" AND 2" STOCK SIZES AVAILABLEBuild Custom Arched Gates With These Heavy-Duty Gate ArchesNOTE:Arched Square Tubing Available In Heavy 14 & 11 Gauge MaterialApproximately 2 feet is added to the length of the arch, allowing thecustomer a marginLengths from 8 Ft. To 16 Ft. in Unfinished Plain Steelof error.Example: 16 foot arch will measure 18 feet wide when purchased, 12 foot will measureStandard Arch - 14" Rise14, etc. There is often a 2-inch leeway on the rise. Standard Arch - 21" RiseExample: A 14-inch rise may measure 13-16 inches. If needed, the rise can be controlledwhen trimming the arch length by Compound Arch - 14" Risecutting only one side.Square Tube Standard Arches - 14" Rise Square Tube Standard Arches - 21" Rise Square Tube Compound Arches - 14"30ITEM#SIZETHKLGTH RISE ITEM#SIZETHKLGTH RISE ITEM#SIZETHK.LENGTH RISEGAA112814S1-1/2"14 ga8 ft.14" GAA112821S1-1/2"14 ga8 ft.21" GAA112814C1-1/2"14 ga8 ft.14"GAA1121214S1-1/2"14 ga12 ft.14" GAA1121221S1-1/2"14 ga12 ft.21" GAA1121214C 1-1/2"14 ga12 ft.14"CATALOGGAA1121614S1-1/2"14 ga16 ft.14" GAA1121621S1-1/2"14 ga16 ft.21" GAA1121614C 1-1/2"14 ga16 ft.14"GAA2814S2"11 ga8 ft.14" GAA2821S2"11 ga8 ft.21" GAA2814C2"11 ga8 ft.14"GAA21214S2"11 ga12 ft.14" GAA21221S2"11 ga12 ft.21" GAA21214C2"11 ga12 ft.14"GAA21614S2"11 ga16 ft.14" GAA21621S2"11 ga16 ft.21" GAA21614C2"11 ga16 ft.14"Arched Gate Kits Pre-punched Rails on 5" Centers for 1/2" Square Bar or Tube to be Used with 1-1/2 Tube for Upright PostsKit Includes a 3-Piece Set for a 3-Rail Gate40" Width for Walk GateITEM #DESCRIPTIONGHARCH4040" Arched Gate Kit72 www.sss-steel.com'